Trenched from house to water meter. Had to open some concrete. Old galvanized steel water service had rusted through, causing leaks. Replaced with new copper water service.
All posts by admin
When it takes too long to get hot water to your kitchen sink or your shower, consider installing a hot water return pump. This install is an example of the pride we take in our plumbing! -Thanks to Wade at Val Betti Plumbing
Roots are always seeking water. They often work their way into your sewer system in search of water. In this case, the roots completely blocked the flow of the sewer system, causing major backup issues! A spot repair was in order to clear the lines of this intrusion. Thanks to Chris and Saul at Val Betti Plumbing Walnut Creek, Ca. for the repair of this piping.
Regular cleaning of sewer pipes is recommended before the issue gets out of hand, as it did in this particular case. Val Betti Plumbing serves the East Bay Area, including: Walnut Creek, Alamo, Danville, Lafayette, Orinda, Pleasant Hill, and Martinez.
Letter from the Wards (Berkeley California):
Hi Val Betti Plumbing,
I just wanted to let you know that your guys have just left our house. I wasn’t here for most of the time – came home just as they were about to fire up the heater. I wanted to write to you to let you know that these gentlemen were absolutely the best. They are courteous, kind, patient, and clearly very, very good at their job. These two are fantastic ambassadors for your family business. It is rare to come across such exceptional craftsmen/technicians who are also so good at customer relations. Please make sure the family knows just ho good they are for your business.
I have been so impressed by you, your expertise and your plumbers.
Val Betti Plumbing Servicing: Walnut Creek, Danville, Alamo, Pleasant Hill, Martinez, Lafayette, Orinda, Berkeley.
Val Betti Plumbing is pleased to announce we are expanding our services. With a new office in Walnut Creek, Val Betti Plumbing is ready to provide its’ neighbors with the excellent service existing customers have come to know. Not only is Val Betti Plumbing a third generation plumbing business, we have third generation customers! We not only want to be you plumber right now, we want to build a relationship, and be your plumber for life. Come join the family, and enjoy the peace of mind that our family will take care of yours.
Servicing: Walnut Creek, Alamo, Danville, Lafayette, Orinda, Pleasant Hill and Martinez.
Garbage disposals are a very useful tool in the kitchen. However over time they can develop unpleasant odors. Here are a few home remedies you can try.
1. Try running the disposal with cut up lemons, the ground up lemons are a natural refresher.
2. Baking soda is another natural and effective odor eliminator. Pour some baking soda down the drain while running warm water to neutralize the odor.
3. Use a garbage disposal brush to clean the grind chamber of your disposal. Unplug your disposal for safety and use the brush with detergent to clean the entire grind chamber. (These brushes can be found at most home improvement stores.)
If you still have odor problems with your disposal there may be a problem with the machine. In this case call Val Betti Plumbing , We currently service the following bay area cities: Alamo, Albany, Berekely, Concord, Crockett, Danville, ElCerrito, ElSobrante, Hercules, Kensington, Lafayette, Martinez, Orinda, Pinole, Pleasant Hill, Richmond, Rodeo, San Pablo, San Ramon, and Walnut Creek.
One of the more common calls we receive at Val Betti plumbing is for clogged bathroom sink drains. Typically the sink gets slower and slower over time. There are a few things you can try as a home owner. They are listed from easy to more difficult.
1. You can try plunging the sink with a plunger. (If your sink has a overflow hole you will need to plug it off with a wet rag)
2. You can remove the pop up and clean any hair that might have built up.
3. You can remove the p-trap and snake the drain line.
We do not suggest any chemical drain cleaners, because they can cause damage to the drain line especially on older houses with metal drain pipes.
MaP = Maximum Performance
MaP testing for toilets was developed in 2003 because we believe that toilets should flush waste – not water!
This free MaP report provides flushing performance scores for more than 2,200 tank-type toilets and is updated monthly. The MaP rating system has been endorsed by consumer groups, manufacturers, retailers, architects, and the US EPA through its WaterSense initiative.
If you want a toilet that performs well, you want a MaP-tested toilet.
About Maximum Performance Testing
Before the development of the MaP Testing Program, many toilets routinely plugged or required double flushing – – they just didn’t work!
Because 99 of every 100 flushes will be for less than 350 grams (12 ounces) of waste, a MaP-approved toilet fixture must flush at least 350g of solid waste. (Note: In 2003, half of the fixtures tested could not even flush 250 g of waste!)
Today, many MaP-approved toilets can flush 1,000g of solid waste (over 2 pounds!) — far more than any human is likely to produce.
NOTE: Manufacturers are NOT required to have their toilet fixtures MaP tested and MaP testing remains a voluntary program. To avoid disappointment, consumers should insist on installing ONLY MaP-tested toilets.
Two suggestions for MaP-approved toilets (that we believe are “good flushers”) are: